Lincoln Sp 135 Mig Welder Manual
MIG Flux-Cored. Ready To Weld! WIRE FEEDER/WELDERS. Three year Lincoln Warranty on parts and labor.
The sp135+ product handout doesn't say multiple pass but should. If you look at suggested settings chart on your welder's door, it requires selfshielding flux core wire for steel 10 ga. (.105') and thicker with multiple passes required. If you look in your manual it discribes multiple pass welding as making a pass on each side of butt joint or making a single pass fillet weld on both sides of a T-joint. I would lower your expectations with that welder and plan on maxing out welding 1/8' steel in one pass and 1/4' in 2 passes.
I wouldn't weld anything critical thicker than 1/8' with that welder. You also asked about stacking weld beads in multiple passes.
Lincoln Sp 135t Mig Welder Parts
I must say that type of weld joint isn't recommended for GMAW or FCAW with 135 amp wire feed welder. Your welder can't get enough weld penitration to consistantly get robust welds with this procedure. They are done by welding in 60 degree V-groove SMAW (Stick Welder) or 45 degree V-groove GMAW for butt welds. Multiple pass fillet welds are also used. They are much harder welds expecially if you have to weld over prior crappy weld.
Well if you do weld over prior crappy weld it's a major sin. Prior welds must be perfect or mistakes ground out and rewelded. Any slag inclusions or other defects you weld over is future failure point. Go ahead and practice that type of weld joint as it is humbling experence.
HTP ®/USAWELD® TIG kit to upgrade the new LINCOLN® Power MIG 210 MP, Model K3963-1 and K4195-1, into the TIG One-Pak model K4195-2. Your kit will include the following items: 1) The USAWELD® equivalent to the PTA-17V Ultra Flex 12 1/2 ft or 25 ft TIG Torch which carries LINCOLN®'s Part Number K1782-6.
Lincoln 135 Mig Welder Review
This torch is made in the USA. 2) The USAWELD® equivalent to the Twist Mate TIG Torch Adapter whichcarries LINCOLN®'s Part Number K960-1. This adapter is made in the USA. 3) The USAWELD® equivalent to the Foot Amptrol which carries LINCOLN®'s Part Number K870. This foot pedal is 12 1/2 ft long and made in the USA.
Lincoln Sp 135t Mig Welder
4) The USAWELD® equivalent to the Foot Amptrol Adapter which carries LINCOLN®'s Part Number K4104-1. Our Price: $9.95.025' -.030' Solid Wire Drive Roll for LINCOLN® Welders. Our Price: $9.95.035' Solid Wire Drive Roll for LINCOLN® Welders. Our Price: $9.95.030' -.045' Solid Wire Drive Roll for LINCOLN® Welders. Our Price: $13.95 LINCOLN® Drive Roller fits LINCOLN® MIG welders below: This roller replaces LINCOLN® OEM part number M16190 Handy MIG 170i LINCOLN® SP-140I MIG PAK 10 LINCOLN® SP-170 MIG PAK 15 LINCOLN® SP-170I Pro 100® LINCOLN® SP-170T Pro 155 LINCOLN® SP-175T Pro Core 100 Weld PAK 100 Pro MIG 135 Weld PAK 100HD Pro MIG 140 (Code 11128 Only) Weld PAK 125 Pro MIG 175 Weld PAK 155 LINCOLN® SP-100I Weld PAK 175HD LINCOLN® SP-100T Weld PAK 3200HD LINCOLN® SP-130T Weld PAK 5000HD and others LINCOLN® SP-135T. Our Price: $18.95 Drive Roller for the following LINCOLN ® MIG Welders: Handy Core (Code# 11059) MIG Pak HD (Code# 11062) Quick Weld (Code# 10964 & 11207) Weld Pak HD (Code# 10949 & 11206) This drive roll replaces LINCOLN ® OEM part# KP2243-035 Roller dimensions: Diameter - 25 mm (about 1') Thickness - Approximately 7.5 mm (just under 5/16') Square Hole - Approximately 7.5 mm (just under 5/16') The roller is knurled, includes grooves for.023' (0.6 mm) and.030' (0.8 mm), and feeds.023',.030', and.035' hard and flux-cored wires.